Astak IP-700: How to View, Record, and Playback Video with the Software
Astak IP-700 Software Download: A Complete Guide
If you are looking for a wireless network camera that can provide you with high-quality video surveillance, you may want to consider the Astak IP-700. This camera is also known as the Astak Mole camera, because it can be easily installed anywhere and accessed remotely. However, before you can enjoy the full benefits of this camera, you need to download and install its software on your computer. In this article, we will show you how to do that, as well as how to use the software to manage and view your camera. We will also cover some of the main features and specifications of the Astak IP-700, and how to troubleshoot some common issues and FAQs.
Astak Ip-700 Software Download
What is Astak IP-700 and why do you need to download its software?
The Astak IP-700 is a wireless network camera that uses H.264 compression technology to deliver clear and smooth video streaming. It has a built-in microphone and speaker, so you can communicate with anyone near the camera. It also has a pan/tilt function, which allows you to remotely control the camera's movement and angle. You can also set up motion detection and email alerts, so you can be notified of any activity around the camera.
To use the Astak IP-700, you need to download and install its software on your computer. The software allows you to configure your camera's settings, view live video, record video, playback video, capture snapshots, and more. You can also access your camera from any web browser or mobile device using the Yoics web portal or app. The software is compatible with Windows and Mac operating systems.
What are the main features and specifications of Astak IP-700?
The Astak IP-700 has many features and specifications that make it a great choice for video surveillance. Here are some of them:
Image sensor: 1/4" CMOS sensor
Resolution: Up to 640 x 480 pixels (VGA)
Frame rate: Up to 30 fps
Lens: F2.8mm / F1.8
Viewing angle: Horizontal: 60 degrees / Vertical: 45 degrees
Pan/tilt angle: Horizontal: 270 degrees / Vertical: 120 degrees
Night vision: IR LED lights with range up to 8 meters
Audio: Built-in microphone and speaker
Wireless: IEEE802.11b/g/n with WEP/WPA/WPA2 encryption
Network: RJ-45 Ethernet port (10/100Mbps)
Storage: Micro SD card slot (up to 32GB)
Power: DC 5V / 2A adapter
Dimensions: 110 x 100 x 108 mm
Weight: 292 g
How to download and install Astak IP-700 software for Windows and Mac?
To download and install Ast k IP-700 software for Windows and Mac, you need to follow these steps:
Go to the official website of Astak at http://www.astak.com and click on the Support tab.
Select IP Camera from the product category and choose IP-700 from the product model.
Click on the Download button and choose the software version that matches your operating system (Windows or Mac).
Save the file to your computer and unzip it if necessary.
Run the setup file and follow the instructions to install the software.
Launch the software and enter the default username and password (admin/admin) to log in.
Congratulations, you have successfully downloaded and installed Astak IP-700 software for Windows and Mac. You can now use the software to manage and view your camera.
How to connect Astak IP-700 to your network and access it remotely?
To connect Astak IP-700 to your network and access it remotely, you need to follow these steps:
Connect the power adapter to the camera and plug it into a power outlet.
Connect the Ethernet cable to the camera and your router.
Wait for about 30 seconds until the camera's LED lights turn green.
Launch the Astak IP-700 software on your computer and click on the Add Camera button.
Select Search Camera from LAN and click on Refresh.
Select your camera from the list and click on Add.
Enter a name for your camera and click on OK.
Your camera should appear on the main screen of the software. You can double-click on it to view live video.
To access your camera remotely, you need to register it with Yoics, a free web service that allows you to access your camera from any web browser or mobile device. To do that, you need to follow these steps:
Create a free account at http://www.yoics.com.
Login to your account and click on Add Device.
Select Astak Mole Camera from the device type and enter your camera's MAC address, which can be found on the bottom of the camera or on the box.
Enter a name for your camera and click on Add Device.
Your camera should appear on your Yoics dashboard. You can click on it to view live video or change settings.
You can also download the Yoics app for iOS or Android devices and access your camera from your smartphone or tablet.
How to use Astak IP-700 software to view, record, and playback video?
To use Astak IP-700 software to view, record, and playback video, you need to follow these steps:
To view live video:
Launch the Astak IP-700 software on your computer and double-click on your camera's name on the main screen.
You should see a live video feed from your camera. You can use the buttons on the bottom of the screen to control the pan/tilt function, capture snapshots, adjust volume, switch between full screen and window mode, etc.
You can also right-click on the video screen and select Show OSD to display information such as date, time, resolution, frame rate, etc.
To record video:
To record video manually, you can click on the red circle button on the bottom of the screen. The button will turn green and a timer will show how long you have been recording. To stop recording, click on the button again.
To record video automatically, you can set up motion detection or schedule recording. To do that, right-click on your camera's name on the main screen and select Edit Camera. Then, go to the Motion Detection or Schedule Record tab and enable the options you want. You can also adjust the sensitivity, area, duration, email alerts, etc. of motion detection or schedule recording.
The recorded video files will be saved in a folder named after your camera's MAC address in your computer's hard drive. You can also change the location of the folder by going to the System Setting tab and clicking on the Change button next to Record Path.
To playback video:
To playback video, you can click on the Playback button on the top of the main screen.
You should see a list of recorded video files on the left side of the screen. You can select a file and click on the Play button to watch it. You can also use the buttons on the bottom of the screen to pause, stop, fast forward, rewind, etc.
You can also search for a specific video file by date, time, camera name, or file name. To do that, click on the Search button on the top of the screen and enter the criteria you want. Then, click on the Search button again and select a file from the results.
You can also delete, rename, or export a video file by right-clicking on it and selecting the option you want.
How to adjust Astak IP-700 settings and preferences?
To adjust Astak IP-700 settings and preferences, you need to follow these steps:
Launch the Astak IP-700 software on your computer and right-click on your camera's name on the main screen.
Select Edit Camera and go to the tab that corresponds to the setting or preference you want to change.
The tabs are as follows:
Basic Setting: Here you can change your camera's name, password, IP address, port number, etc.
Video Setting: Here you can change your camera's resolution, frame rate, brightness, contrast, etc.
Audio Setting: Here you can enable or disable your camera's microphone and speaker, and adjust their volume.
Motion Detection: Here you can enable or disable motion detection, and adjust its sensitivity, area, duration, email alerts, etc.
Schedule Record: Here you can enable or disable schedule recording, and set up its time, date, frequency, etc.
Email Setting: Here you can set up your email account and server information for sending email alerts.
FTP Setting: Here you can set up your FTP account and server information for uploading video files.
DDNS Setting: Here you can set up your DDNS service information for accessing your camera from a dynamic IP address.
Wireless Setting: Here you can set up your wireless network information for connecting your camera wirelessly.
Pan/Tilt Setting: Here you can set up your camera's pan/tilt speed, preset positions, patrol mode, etc.
Date/Time Setting: Here you can set up your camera's date and time format, timezone, daylight saving time, etc.
Miscellaneous Setting: Here you can set up your camera's OSD display, IR LED mode, reboot schedule, etc.
After making any changes, click on Apply or OK to save them.
How to troubleshoot Astak IP-700 common issues and FAQs?
If you encounter any problems or have any questions while using Astak IP-700, you can try the following solutions or refer to the following FAQs:
Common issues and solutions:
Issue
Solution
The camera cannot connect to the network or the software.
Check the power and Ethernet cable connections. Make sure the camera's LED lights are green. Make sure your router and computer are working properly. Make sure your firewall or antivirus software is not blocking the camera or the software. Try to reset the camera by pressing the reset button on the back of the camera for 10 seconds.
The video quality is poor or choppy.
Check the network speed and bandwidth. Make sure there is no interference or obstruction between the camera and the router. Adjust the video settings such as resolution, frame rate, brightness, contrast, etc. Try to use a wired connection instead of a wireless connection.
The audio quality is poor or noisy.
Check the audio settings such as volume, microphone, speaker, etc. Make sure there is no background noise or echo near the camera or the computer. Try to use a headset or earphones instead of speakers.
The motion detection or email alerts are not working.
Check the motion detection or email settings such as sensitivity, area, duration, email account, server, etc. Make sure your email account and server support SMTP protocol and SSL encryption. Make sure your email inbox is not full or blocked by spam filters.
The pan/tilt function is not working.
Check the pan/tilt settings such as speed, preset positions, patrol mode, etc. Make sure the camera is not obstructed by any objects or wires. Try to reset the camera by pressing the reset button on the back of the camera for 10 seconds.
FAQs:
What are the system requirements for Astak IP-700 software?
The system requirements for Astak IP-700 software are as follows:
Operating system: Windows XP/Vista/7/8/10 or Mac OS X 10.6 or above
CPU: Intel Pentium 4 2.0GHz or above
Memory: 512MB RAM or above
Hard disk: 200MB free space or above
Display: 1024 x 768 pixels or above
Network: Broadband Internet connection (DSL/Cable/Fiber)
Browser: Internet Explorer 6.0 or above, Firefox 3.0 or above, Safari 3.0 or above, Chrome 5.0 or above
How can I update Astak IP-700 firmware and software?
To update Astak IP-700 firmware and software, you need to follow these steps:
Go to the official website of Astak at http://www.astak.com and click on the Support tab.
Select IP Camera from the product category and choose IP-700 from the product model.
Click on the Firmware Update or Software Update button and download the latest version of firmware or software for your camera.
Save the file to your computer and unzip it if necessary.
Launch the Astak IP-700 software on your computer and right-click on your camera's name on the main screen.
Select Edit Camera and go to the Miscellaneous Setting tab.Click on the Update Firmware or Update Software button and select the file you downloaded.
Follow the instructions to complete the update process.
Restart your camera and software to apply the changes.
Note: Do not turn off your camera or computer during the update process, as this may cause damage to your camera or software.
How can I reset Astak IP-700 to factory settings?
To reset Astak IP-700 to factory settings, you need to follow these steps:
Turn off your camera and unplug the power adapter.
Locate the reset button on the back of the camera. It is a small hole with a label "RESET".
Use a pin or a paper clip to press and hold the reset button for 10 seconds.
Release the reset button and plug in the power adapter.
Wait for about 30 seconds until the camera's LED lights turn green.
Your camera is now reset to factory settings. You need to reconfigure your camera's settings and preferences using the software or the web interface.
How can I contact Astak customer support?
If you need further assistance or have any questions or feedback about Astak IP-700, you can contact Astak customer support by using one of the following methods:
Email: support@astak.com
Phone: 1-866-ASTAK-88 (1-866-278-2588)
Fax: 1-408-453-1188
Mail: Astak Inc., 2079 N. Capitol Ave., San Jose, CA 95132, USA
Website: http://www.astak.com
Where can I find more information and resources about Astak IP-700?
If you want to learn more about Astak IP-700, you can find more information and resources by using one of the following methods:
User manual: You can download the user manual for Astak IP-700 from the official website of Astak at http://www.astak.com. The user manual contains detailed instructions and illustrations on how to use and troubleshoot your camera.
Video tutorials: You can watch video tutorials for Astak IP-700 on YouTube at https://www.youtube.com/user/AstakInc. The video tutorials show you how to set up, configure, and use your camera step by step.
Online forum: You can join the online forum for Astak IP-700 at http://www.astakforum.com. The online forum is a place where you can share your experiences, ask questions, get answers, and interact with other users and experts of Astak IP-700.
Conclusion
In this article, we have shown you how to download and install Astak IP-700 software for Windows and Mac, how to connect Astak IP-700 to your network and access it remotely, how to use Astak IP-700 software to view, record, and playback video, how to adjust Astak IP-700 settings and preferences, and how to troubleshoot Astak IP-700 common issues and FAQs. We hope this article has been helpful and informative for you. If you have any comments or questions, please feel free to contact us or leave them below. Thank you for reading!
FAQs
Q: What is the difference between Astak IP-700 and Astak Mole?
A: Astak IP-700 and Astak Mole are two names for the same product. They are both wireless network cameras that use H.264 compression technology to deliver clear and smooth video streaming. They have a built-in microphone and speaker, a pan/tilt function, motion detection, email alerts, and more. You can use either name interchangeably when referring to this product.
Q: How many cameras can I add and view with Astak IP-700 software?
A: You can add and view up to 16 cameras with Astak IP-700 software. You can also group them into different categories for easier management. You can view up to four cameras simultaneously on one screen, or switch between different screens to view different cameras.
Q: How can I share my camera with other users?
A: You can share your camera with other users by using Yoics, a free web service that allows you to access your camera from any web browser or mobile device. To do that, you need to follow these steps:
Register your camera with Yoics by following the steps in the previous section.
Login to your Yoics account and click on your camera's name on your dashboard.
Click on the Share button and choose the option you want. You can share your camera with a specific user, a group of users, or the public.
Enter the email address or username of the user or group you want to share with, and click on Send Invite.
The user or group will receive an email or a notification with a link to access your camera. They will need to create a Yoics account if they don't have one already.
Note: You can also revoke or modify the sharing permissions at any time by clicking on the Share button again and selecting the option you want.
Q: How can I improve the security of my camera?
A: You can improve the security of your camera by following these tips:
Change your camera's default username and password to something more secure and unique. You can do that by going to the Basic Setting tab and entering a new username and password.
Enable encryption for your wireless network and use a strong password. You can do that by going to the Wireless Setting tab and selecting the encryption type and entering the password.
Use a firewall or antivirus software on your computer and router to prevent unauthorized access or malware attacks. You can also check your firewall or antivirus settings to make sure they are not blocking your camera or software.
Update your camera's firmware and software regularly to fix any bugs or vulnerabilities. You can do that by following the steps in the previous section.
Avoid sharing your camera with unknown or untrusted users. You can also limit the access rights of the users you share with by using Yoics.
Q: How can I delete my camera from Astak IP-700 software or Yoics?
A: To delete your camera from Astak IP-700 software or Yoic